• dutch

Roof Angel can be installed on a variety of roofing types, from trapezoidal sheeting to concrete decks and more.

Roof Angel Applications

Roof Angel can be installed on every type of roofing system, from trapezoidal systems to single ply membranes, from concrete to traditional tiled roofing areas.

With the universal design of the components there are minimal changes between each type, meaning installation times are quicker through increased experience for the installer.

Variety of roofing build ups

In the detail below you can see some of the more standard variants of installation on different roofing systems possible with Roof Angel.

In addition to this we offer a bespoke service for any non-standard installation requirements. For any installation requirements not listed below then please contact us.

Roof Angel on trapezoidal roof

Using bulb type rivets Roof Angel is installed to the crowns of the roof sheet.  There are different sizes of base plate to accommodate all pitches of roofing sheet.

 

Roof Angel on bulb type standing seam

Using S-5! clamps Roof Angel is installed to the crowns of the roof sheet.  There are different sizes of base plate to accommodate all pitches of roofing sheet.

 

Roof Angel on rolled type standing seam

Using S-5! clamps Roof Angel is installed to the crowns of the roof sheet.  There are different sizes of base plate to accommodate all pitches of roofing sheet.

Roof Angel on membrane roofing with ply deck

Using toggle bolts Roof Angel is installed to the base decking of the roof sheet.  There are different coatings on our base plate range to accommodate different top sheets

Roof Angel on membrane roofing with ply deck with Sedum

Using toggle bolts Roof Angel is installed to the base decking of the roof sheet.  There are different coatings on our base plate range to accommodate different top sheets.  By using shuttering around the base plate the post is able to activate correctly in the event of a fall.

Roof Angel on membrane roofing with metal deck

Using toggle bolts Roof Angel is installed to the base decking of the roof sheet.  There are different coatings on our base plate range to accommodate different top sheets

Roof Angel on membrane roofing with metal deck with Sedum

Using toggle bolts Roof Angel is installed to the base decking of the roof sheet.  There are different coatings on our base plate range to accommodate different top sheets.  By using shuttering around the base plate the post is able to activate correctly in the event of a fall.

Roof Angel on membrane roofing with concrete deck with Insulation

Using stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed to the base decking of the roof sheet.  There are different coatings on our base plate range to accommodate different top sheet.

 

Roof Angel on Sedum roof with concrete deck and Insulation

The Roof Angel post  and stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed to the base decking of the roof sheet.  By using shuttering around the base plate the post is able to activate correctly in the event of a fall.

 

Roof Angel on concrete deck

The Roof Angel post  and stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed to the base decking of the roof sheet.

Roof Angel on concrete deck with Sedum

The Roof Angel post  and stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed to the base decking of the roof sheet.  By using shuttering around the base plate the post is able to activate correctly in the event of a fall.

Roof Angel to concrete with Sedum using Rigid Post and Absorbing Module

The Roof Angel Green Roof post with Roof Angel post module and stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed to the base decking of the roof sheet.

Roof Angel wall mounted to Masonry

With the wall mount bracket, in line shock absorber and using stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed at the correct angle to allow the RA-3001 shuttle to pass easily.

 

Roof Angel wall mounted to Steel

With the wall mount bracket, in line shock absorber and using stainless steel bolts Roof Angel is installed at the correct angle to allow the RA-3001 shuttle to pass easily.

Roof Angel Rigid post on concrete deck

With the rigid post, in line shock absorber and using stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed to the concrete deck.  Insulation and top sheet can then be installed and the post can be weathered to, finished with a stainless steel rain cap.

 

Roof Angel Rigid post on concrete deck with Sedum

With the rigid post, in line shock absorber and using stainless steel bolts and chemical or mechanical anchorages Roof Angel is installed to the concrete deck.  Insulation and top sheet can then be installed and the post can be weathered to, finished with a stainless steel rain cap.

Roof Angel Rigid post on Hollow Core Concrete with Toggles

Using toggle bolts Roof Angel is installed to the base decking of the roof sheet.  There are different coatings on our base plate range to accommodate different top sheets.

Roof Angel Rigid post on Hollow Core Concrete with M12 Stud

Using M12 Stud and 100mm Back Plate Washers Roof Angel is installed to the base decking of the roof sheet.  There are different coatings on our base plate range to accommodate different top sheets.